Regular Members

Suzhou Haixiang Plastic Chemical Co.,Ltd

Product category
  • N/A
Search
 
Friends links
  • N/A
Supplier Homepage > Products > TPE Flame Retardant Masterbatch (FR-TPE500)
TPE Flame Retardant Masterbatch (FR-TPE500)
Click on the image to check the artwork
product: view count: 228TPE Flame Retardant Masterbatch (FR-TPE500) 
unit price: Negotiable
min amount:
amount:
period for delivery: Consignment Deadline days
Expiry date: Long Effective
last update: 2017-12-15 04:54
  enquiry
detailed

Introduction

FR-TPE500 consists of environment friendly flame retardant system of bromine and antimony, developed for TPE (thermoplastic elastomer). Mainly used in insulated cable (TPE, TPV, TPR or TPU), low dosage and high performance. FR-TPE500 can pass UL1581VW-1 test, and it is not limited by the Directive 2002/95/EC of the European Parliament and of the Council on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment. Advantage: good gloss, non-blooming, good water resistance, excellent transference resistance, good electric performance.

Index

Item

Index

Appearance

White Granular

Content %>

70

Density g/cm3

2.13

Melt Index g/min,220℃5kg

3.4

Water Content %≤

0.1

Decomposition Temp ℃≥

300

Extrusion Process (Twin Screw Extruder)

Packing/Storage

25KG/bag: Transported as a common chemical and stored in dry and cool place, avoid direct sunlight.

Appendix:Application Examples

1-1.Formula

Materials

Formula

TPE

90

FR-TPE500

10

1-2.Technical Data

Properties

Test Methods

Unit

TPE

raw material

Formula

Density

ASTM D-792

g/cm3

1.10

1.15

Hardness

ASTM D-2240

Shore A

3

5

Melt Index

(200℃/2.16KG)

ASTM D-955

g/10min

87

-

Tensile Strength

ASTM D-638

MPa

8.2

12

Elongation At Break

ASTM D-638

%

757.2

820.2

Retardancy 0.1mm

UL 1581

--

VW-1

VW-1

1-3. Injection Process:

Drying condition: Drying at 100 deg C to 2-3 hours by desiccant dryers.

Extruder: use general extruder, screw L/D 25:1, compression ratio 3.

Injection machine temperature setup:

Heating Zone

Step1

Step2

Step3

Nozzle

Temperature

175

185

190

185

Note:

1.All the application typical data above are just for reference, not an official warranty certificate.

2. Provide different design solutions according to requirement of customers.

inquiry list